IGOW Whoop tower PVC 20mm
Description
Designed a tower gate for the igow challenge. This week we will need a gate and a tower print these pieces to make your own gate These corners are for standard pvc pipe with outer diameter of 20mm For the complete tower + gate you need: 4x Tcorner 4x90corner 4xFeet 4xEndcap Printing: i printed them at 0.32layer height with 6 walls 5 top and bottom layers and 10% infill in PLA at 90mm/ss The supports snapped out really easy with the "support z distance @ 0.2mm" takes roughly 1.5h per corner with the settings above
Statistics
Likes
2
Downloads
0