Duki "air conditioning"
Description
Hi. I’d like to share with everyone my Duki chilled air blower. In this design, some basic “variations on the theme” are utilized: -A spiraled intake to increase the amount of time the air is in contact with the cold bottle -A Chick-fl-a straw that dumps the bottle condensation outside of the cooler and onto the surface the Duki is positioned on Things you will need: Chick-fl-a large straw (7mm Diameter… its actually like 6.7mm-ish) 4ct M4x55 bolts 4ct M4 nut Evian 1L water bottle 120mm PC fan -1.Assemble based on looking at the diagram. If you are reading this, I will assume that you are capable of looking at pictures. The only thing is to make sure the fan is pulling air from the cooling tower and pushing it into the vent on the bottom, basically the fan needs to be blowing downwards. -2. Cutting the straw: the holes on the legs are guides for cutting the straw (sneaky, right?). You’ll need a craft knife or razor blade for this. Insert the straw into the leg features and slide your blade flush with the leg to cut the straw to the correct angle. Then insert the straw into the hole in Duki’s front and align it with the condensation collector in the middle (render showing what this should look like). Giving Duki a good smack while in use should clear any water from the system. -3. Fill evian water bottle more than halfway with salt water this lowers the freezing point of the bottle so that the bottle won’t break from ice forming and expanding but will also remain cold.
Statistics
Likes
31
Downloads
0