vinyl plotter
Description
Vinyl cutting plotter, as cheap as possible. List Of Parts: Arduino Uno CNC Shield Drv8825 x2 Nema17 Stepper Motors 2020 V or G-Slot (as long as you want) x5 M8 Threaded Rods x1 M10 Threaded Rod x2 Smooth Rods 3mm thick plywood or similar 30*30FAN 20 Tooth GT2 Pulley 6mm GT2 Belt 4 Spings 420 Sandpaper A lot of 10mm orings 16 M8 Nuts 2 608ZZ Bearings And Some M3, M4, M5 Screws and Nuts 12mm Alum Tube. 9G Micro Servo The "Guia Vinilo" it's optional, not very necessary, but useful. The lenght of the Belt, the rods, the plywood, the profile, it depends on your needs, depending on how wide you want it to be. The "Soporte M10" you need to miror it, you need 2 of them. I include the GRBL code wich I used, Iused lasergrbl to send the pieces to be cut. It's a finished project, i used it, and it works verry well, but it's not perfect, you could improve it, I wold like to see your makes. If you wish, you can follow us on Instagram. @Syntaxis3D
Statistics
Likes
0
Downloads
0