Pickle Evo Canopy
Description
Canopy is designed for the pickle evo frame frome Ledrone. however, it would mount to any whoop mounting pattern. It has an antenna mount for simple dipole antennas. The eos2 mount can friction mount runcam nano 2 or eos2 type cameras. The 10mm camera mount was designed for the caddx kangeroo, but will also work for 25mw aio type cameras. To connect the camera mount to the canopy, I used a 5mm m2 screw and nut. Printed in TPU 100% infill with supports.
Statistics
Likes
3
Downloads
0