wltoys 12427 12428 sway bar anti-roll bar mod
Description
Print 2 piece of each part. Make one set mirrored. You have to countersink the screwhole on the bottom of the arm mount part if you want the screw to sit flush. I've done this with a simple drillbit on high rpm. For the bar itself use a 2mm steel wire and bent it to match the width of the rear arms. If i'm not mistaken, the sharper your bend the stronger the anti-roll effect will be. To attach the bar to the rear arm i used the bar-to-arm part and used hot glue. You can use anything for this purpose but the bar should be able to slide through it freely yet must not be loose. Hardware required: * 2mm steel wire * 4pcs m2 screws for fixing the backplate to the arm mount. * hot glue
Statistics
Likes
1
Downloads
0