Electronics box for 3d printer
Description
Update: Added A Quick Lid For Those Possibly Interested In Using This Design Stand-Alone. Also Added Some Pictures Of The Printed Result And Fit. I Made This Electronic Box For My Velleman K8400. Designed To Hold An Original Raspberry Pi Model B, Two Lm2596 Voltage Regulators And A Reprap.Me Power Expander. Voltage Regulators And The Power Expander Board Is Meant To Be Screwed In Place. My Raspberry Pi Lacks Mounting Holes And Is Fitted Between A Couple Of Small Holders In This Design, I Might Further Fasten It With A Dab Of Hot Glue If It Is Necessary When Mounted On The Printer. I Am Planning To Use One Of The Voltage Regulators To Power The Pi And The Other At 12V To Supply Ikea Led Strips. I Have Not Intended To Use A Lid For This Design, Since I Am Planning To Mount The "Box" Directly Underneath The Velleman K8400 On The Bottom Panel. I Have Not Completed A Full Print Yet But Have Had A Chance To Test The Fit (Had To Stop Mid-Print Due To Clogging, Most Likely Have To Adjust My Retraction Settings).
Statistics
Likes
71
Downloads
0