Midwest / Scepter Gas Can Nozzle and Cap (with f3d)

Midwest / Scepter Gas Can Nozzle and Cap (with f3d)

Description

Midwest / Scepter Gas Can Nozzle and Cap (with f3d) As you probably know most of these gas cans spill very easily. The silly valve attachment never works correctly. Even when it works, it leaks through the neck spilling gas all over. So, I designed and printed a very simple solution. The design reuses the threaded part of the gas can cap. This is a good idea, as you definitely want the threaded section to be extremely strong, and a 3D printed one might not cut it, in the long term. (Depending on material and print capabilities) IMPORTANT NOTE: Highly recommend printing on smooth glass so that the mating surface of the part with the gas can is smooth and air tight. IMPORTANT NOTE: Please be very careful when modifying Gas Cans. Please ensure that they are air tight. You might need to make some adjustments to make the cap air tight for your own can, and that is why f3d is attached. I can't be responsible for any damages.

Statistics

Likes

13

Downloads

0

Category

Tools