Kyosho Mclaren 12C Display Base (Top Gear Theme)
Description
###If you like my display designs, feel free to follow me on twitter and instagram! Feel free to comment and provide any feedback too! ###[Twitter](https://twitter.com/Giga_Penguin) ###[Instagram](https://www.instagram.com/GigaPenguin3DPrinting/) Description ==================== A base for Kyosho Mclaren 12C, it should work with all Kyosho Mclaren 12C releases. The display base is separated into 3 parts for easy printing and colour swap. The parts are: 1) Name plate (NamePlateAssem.STL) 2) Base (BaseV2.STL) 3) Base back wall (BoxBackAssem.STL) Print Settings ==================== Nozzle size = 0.4 mm (minimum, smaller better) Layer height = 0.2 mm Filament change layer for colours on "BoxBackAssem": 1) Start (colours of the roads around the map, mine is in grey) 2) Layer 13 (Grass area of the track map, mine is in green) 3) Layer 18 (Top Gear "Gear" colour, mine is in blue) 4) Layer 23 (Colours for all lettering, mine is in white) 5) Layer 28 (Track map route colour, mine is in orange-ish golden) 6) Layer 33 (Mclaren symbol, arrows on tire wall and start, mine is in red) Filament change layer for colours on "NamePlateAssem": 1) Layer 10 (Top Gear "Gear" colour, mine is in blue) 2) Layer 15 ("Top Gear" and "Test Track", mine is in white) Colours ==================== Colours of all other items is your choice. Assembly ==================== The car is screwed back using the original screw from Kyosho. Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box. Others ==================== Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too. The transparent box I'm using to store the base and car in one of the picture is bought from here: https://shopee.com.my/Tarmac-Work-Protector-tarmac-box-i.13932494.1598531194
Statistics
Likes
8
Downloads
0