Purge bucket for GeeeTech A30T.
Description
Purge bushing for A30T. I used different files but didn't want to unscrew the bolts on the Z-axis, so I matched the X-axis motor cover with a 10mm limit switch offset and a basket. I changed the nozzle to stainless, but it is longer than the standard one. Therefore, I dropped the basket below. I think that if you use a standard nozzle, then you just need to make the silicone insert above. Good luck to all. Thanks https://www.thingiverse.com/thing:4731557 https://www.thingiverse.com/thing:4182279
Statistics
Likes
0
Downloads
0