SUPER STAND Mod for ttoommeekk's "simple stand", suits sliding Legolini

Description

"Let me Show you its Features" The Legolini Super stand mods Convert the "simple stand" By ttoommeekk's. https://www.thingiverse.com/thing:4295280 Into the Super stand. This stand is great as Bow strings can be left on the Bow with this stand design. The mods include, Bolt holders, Bow end lock-in, Bolt Ammo Box storage area and Rubber band and tool box. CREDITS Legolini Ammo Box by GlobalWarmer breshikovsky"s Bolt holder ttoommeekk for designing the Simple stand ------------------------------------------------------------------------------------ The simple stand is quickly becoming the Swiss army Knife of stands lol, I will be designing more mods for the "Simple stand" Now known as the Super stand. You can use as many or as little of these Upgrades as you like. ---------------------------------- You will be required to download the simple Stand from https://www.thingiverse.com/thing:4295280 and if you want the ammo box then its from https://www.thingiverse.com/thing:4643717 You will also need this finger grip for the legolini, which helps with aim when shooting, but also the stand requires it as it holds the Legolini on the stand https://www.thingiverse.com/thing:4928486 everything I have created works around those Items listed above ----------------------------------------------------------- For all parts 15% infill No supports needed .15 print FOR MOST PARTS, a 200MM Build Plate is needed, For the Largest section being the SuperStand-Bottom STL, you need a 210mm build plate. Mine was Printed on a Anycubic Mega S so it all fitted Just on the bed, as the largest width on a part is 208mm and the mega S is 210mm EDIT, the picatinny Sight mod stand will require supports, the only part that does ------------------------------------------------------------------- Assembly Instructions>>>>> You may have to Lightly file edges on the bottoms of the Middle section, and base of tool box, as the base section is a perfect fit, if there is a slight edge from printing a quick file will allow it to snap in place, you can Also glue all sections if you wish. the lid for tool box may require a quick file to clean up dags to get correct fitment. Why are things made so tight with little tolerances? I did this so parts can click in place and hold all parts tight, so spend a bit of time nicely sanding or filing edges for best results. The Bow lock mod,which is the "simple Plate lock stl" can either be glued or a M3 screw can be used to fix it in place. The Lock even with the spacer will allow some movement, This is done so while even locked in place you can move the Legolini slightly so you can service the Legolini. this does make things much easier while working on your Legolini having some movement. Upright standing- using the Bow lock and the spacer, you can stand the bow upright and it will hold it self there, that allows you to work on the bow upright as well as in its resting position of nose down. When you lift the bow upright with the pin locked in and the spacer installed you slip the tip of the bow backwards slightly and it will lock it self in, and it will hold it self in that position. Reverse upright standing- uses the upright stand stl and the legolini is put on the base in reverse, as pictured. The upside to this mod is even upright strings can be left on the bow, and It could technically also allow you to leave on display in upright position. I am considering a wedge Mod to allow it to be locked in Further for displaying upright. The Bolt Holder mod can be placed On either side of the stand. Its a nice snug fit so it can hold it self in place but still be kept removable. you could print one off for each side if you wish. The Service tool Box can be used to hold spare Rubbers, Springs, strings, and an Allen Key. its only a small space, but The Legolini doesnt need many tools. There is a picatinny rail Mod, that allows you to store a spare Laser sight. But i have not tested that mod yet, I have also allowed a space for it in the top trim. this mod Attaches to the side of the Stand base. the picatinny rail also uses the same bore size as the bolt holder mod, so you could always use the rail section in replacement of the bolt holder, and vice-versa Bow strings can be left on on the Bow with this design stand, Which is why I chose to Mod this stand over others. Well with the addition of all these mods, you have a Super stand and small work station for your Legolini, you can chose to not put all mods on, Its all modular. In the future New mods maybe uploaded, so check back from time to time. thank you and please leave Click Like and share.

Statistics

Category

Tags