Just a mouse
Description
I wasn't able to find a mouse 3d model here, so I just create my prototype by doing a reverse engineer of one I have at home. As I mentioned, this is a prototype and there are a bunch modifications do to related to the ergonomics, shape, aspect, etcc. Printing Base: Support: no Wall line count: 4 Infill: 20% is enough Top/Bottom layer: 3 as advice Layer height: 0.2mm is not so bad Print top: Should be print vertically for a better aspect. Obviously with support. Brim or raft is mandatory. Wall line count: 4 Infill: no Top/Bottom layer: 3 as advice Layer height: 0.1 will be nice but 0.2 it's ok There are a few post-printing to do but I'm working to avoid it.
Statistics
Likes
0
Downloads
0