Raspberry Pi Compute Module 4 IO Board Case
Description
This is a remix of Glaspedal's Raspberry Pi 4 Compute Module IO Board case. Many thanks to Glaspedal for coming up with the original design. I've split the model into separate STLs for printing, plus I've included variations which allow for a PCIe card to be added and to protrude from the case. Lastly, an additional variation of the lid has been included with increased ventilation for a heatsink and fan to be installed on the CM4, such as this unit found on AliExpress: https://www.aliexpress.com/item/1005002882559335.html In the attached photo, the PCIe card added is a PCIe x1 NVMe adaptor: https://www.aliexpress.com/item/4000322318347.html Printing: CM4Case-Base.stl - Glanspedal's original base as a separate STL file. CM4Case-Lid.stl - Glanspedal's original lid as a separate STL file. CM4Case-Base w_PCIe Slot.stl - Glanspedal's original base with slot added for PCIe expansion card. CM4Case-Lid w_PCIe Slot.stl - Glanspedal's original lid with slot added for PCIe expansion card. CM4Case-Lid w_PCIe Slot and Fan Grill.stl - Glanspedal's original lid with slot added for PCIe expansion card plus additional grill for heatsink and fan. Enjoy and please post your makes, I'm keen to see how they turn out :)
Statistics
Likes
10
Downloads
0