iVac Pro Blast Gate Mount
Description
# iVac Pro Blast Gate Mount > A two-piece mounting solution to affix your iVac Pro Blast Gate to the wall ## Requirements: - Mounting bracket (STL included) - Mounting lower foot (STL included) - (2) 1 1/2" or longer construction screws or drywall anchors to affix mount to wall - (3) M6 x 25mm screws (M4 and M5 will also work; longer than 25mm is okay) - (3) M6 washers - (3) M6 nuts ## Usage: - Print the mounting bracket and mounting lower foot. I printed mine in PETG, but PET is fine too. - Using 2 screws, mount the upper bracket to the wall as shown in the picture. Screwing into a stud is best, but drywall anchors will also work. - Using an M6 screw, washer, and nut, attach the mounting foot to the Blast Gate at the corner closest to the power supply port. - Using the remaining sets of hardware, attach the end of the blast gate with the lettering to the mount. - Attach your hoses, the power adapter, and GET SUCKING
Statistics
Likes
7
Downloads
0