Arduino Uno Bracket
Description
This is an Arduino Uno / Seeeduino Lotus bracket for another project. It can be attached to other enclosures or surfaces using M3 screw or M3.5 tapping screw (the mounting hole layout is in the picture). I build this design based on an Arduino Uno 3D sketch but since the Seeeduino Lotus shares the similar shape and mounting holes with Uno, it works perfectly for my board. The mounting pin needs to be connected to the bracket by using some super-glue or hot glue. I tried my prints with hot glue and it works just fine, it's strong enough to hold the board at 45°. You can use one M2 screw to prevent the board from sliding out of the bracket (but my print parts are not very clean so the pins will be stuck in place so the board actually won't move). The design still needs a little support material, but I thought this is OK for the current version, maybe I will improve it in the future. I also put the STP file in it (although it's a pretty messy file) so feel free to modify it to fit your usage.
Statistics
Likes
0
Downloads
0