Quick To Print Large Vice
Description
Quick To Print Large Vice Notes: This design is primarily a good starting point for remixes and the OBJ files have been included print Settings: nozzle diameter: 0.40mm && 1.0mm layer height: 0.20mm && 0.75mm infill: 25% support: Yes only small amount though walls: 4 && 2 top and bottom layers: 3 to 4 material: PLA Parts Needed: NONE Special Instructions: print both the screw and nut with 0.2mm resolution on a 0.4mm nozzle print the nut at 102% scale file the screw ever so slightly where the layers start and end to clean up the edges print the vice body 0.75mm resolution on a 1.0 mm nozzle print the vice jaw with support in the cut out for the nut please feel free to leave comments and feedback please checkout my other designs: https://www.thingiverse.com/carter_383/designs please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe yo improve my designs or ideas or new ones https://paypal.me/3DCarter383?locale.x=en_GB Links: printer: https://tinyurl.com/whd9ruaj filament: https://tinyurl.com/pr7d5cs6
Statistics
Likes
2
Downloads
0