BLTouch mount for Tevo Tarantula (for stock heatsink) [heat sink hotend]

Description

Another BLTouch mount for Tevo Tarantula. Used comfortable for stock heatsink in my case. Recomendeed printing orientation green on picture. Holes for wires on both sides, I used the nearest to the heatsink. I have long screws and don't want to cut them shorter, so I designed two versions, normal with 10mm wide base what I used and slim with 5mm wide base. Screws are M3. Z probe offset is -1,6mm in my case (but you should tune it well for your 3DP) Marlin configuration used in my case (could be seen on video): Configuration.h: /#define NOZZLE_TO_PROBE_OFFSET { 0, 35, -1,6 } /#define XY_PROBE_FEEDRATE (160*60) /#define PROBING_MARGIN 10 /#define Z_PROBE_FEEDRATE_FAST (8*60) /#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) /#define MULTIPLE_PROBING 2 /#define Z_CLEARANCE_DEPLOY_PROBE 5 /#define Z_CLEARANCE_BETWEEN_PROBES 4 /#define Z_CLEARANCE_MULTI_PROBE 2 /#define Z_AFTER_PROBING 5 Configuration_adv.h: /#if PROBE_SELECTED && !IS_KINEMATIC /#define PROBING_MARGIN_LEFT PROBING_MARGIN /#define PROBING_MARGIN_RIGHT PROBING_MARGIN /#define PROBING_MARGIN_FRONT 70 /#define PROBING_MARGIN_BACK PROBING_MARGIN /#endif Video from Homing test with Priming Line: https://youtu.be/-8Zgm7sbnqw

Statistics

Category

Tags