Soapdish for glassdoor
Description
This soapdish clamps onto an upto 5mm thick glassdoor, e.g. a showerwall. The tray is 140x54mm. The .stl is already oriented in a way to only need supports in the upper inner wall of the tray. I also included a cut version and one with 2 halfs which can be printed without any supports and then glued together in the middle. I used Eryone Transblue PETG at 0.25mm layerheight, 3 perimeters and 20% Infill.
Statistics
Likes
0
Downloads
0