4inch Racewhoop Pro
Description
I decided to design my version of the amazing FreeZillion 3 inch Racewhoop, but in 4 inch. Thanks to FreeZillion (https://www.thingiverse.com/thing:4608171) for inspiring this project. I've attached the full project from Fusion 360 if you want to modify something. The TPU Addons are the same from the original FreeZillion project. My choice is to use a XING 2203.5 of 3600Kv (4s) for this 4 inch version. The props are HQPROP 4" 6 blades ducted: https://a.aliexpress.com/_mPbmNqx Here are the printing instructions to print out the Ducts from FreeZillion: Infill 5-8% Dual infill lines Connect infill lines 2 wall Combing mode all 5 top layer 5 bottom layer Grid infill Temp 242° Bed 60° with brim and PVA Flowrate 105 infill and 110 wall Print infill first 20mm print speed "on everything'' Retraction 8,5 and retraction speed 30 Mesch for motor mount 100% infill and connecting Points Print the ducts on PCTPE (Taulman) or PA12CF15 (Nylon PA12 with 15% of Carbon Fiber) for best resistance and durability. --------- UPDATE ON 05/10/20121: - Updated duct mounts for more strenght
Statistics
Likes
3
Downloads
0