Pan Tilt for ArWing 900
Description
Pan and Tilt camera for ArWing 900. Designed for DJI FPV camera. Video of the pan&tilt in action can be found here: https://www.youtube.com/watch?v=oDVRuIh4Xgg #Printing# Print all parts and assemble as shown in the picture. I used EMAX ES08MA servos but any mini sized servo should fit the mount. #Detailed installation quide# * Push servo into *"base mount"* and use small drop of glue to secure it in place * Push *"servo ring"* over the servo to create smooth plane for the main camera mount to swivel on. * Push servos axis into *"Camera mount"* and use servos screw to secure the "camera mount" into the servo. * Screw DJI camera into *"camera mount"* from cameras **lower mounting holes**. (not too tight so that camera can pivot freely) * Screw *"arm"* to second servo and into DJI cameras **upper mounting hole** (not too tight so that camera can pivot freely) #Other optional parts used# * [Vertical FC mount to make more room inside the canopy](https://www.thingiverse.com/thing:4757872) * [TBS GPS M8.2 cover into camera slot](https://www.thingiverse.com/thing:4757856) #Derivatives# Base part is derivative from this model https://www.thingiverse.com/thing:3201160 with following modifications: * Improved its mounting * Added correct holes for DJI camera * Added mounts for Caddx Cherry antenna * Added place for top servo * Created blind if you don't want to use the main camera mount
Statistics
Likes
2
Downloads
0