AA and AAA Battery Dispensers
Description
Just a simple design for a holder/case for AA and AAA batteries. Can be stacked on top of one another, AA on AA and AAA on AAA. AAA dispenser takes 5.5 hours to print and weighs 47g, but uses 50g of black HP PLA. AA dispenser takes 6.75 hours to print and weighs 64g, but uses 67g of black HP PLA. Printed on Creality Ender 3 V2 using Ultimaker Cura v4.10.0. Settings are as follows: Layer Height: 0.24mm Wall thickness: 0.8mm Wall Line Count: 2 Infill: 5% (Cubic) Printing Temperature: 205 Build Plate Temperature: 55 Print speed: 60mm/s for infill and 30mm/s for walls Retraction enabled Retraction Distance: 5mm Retraction speed 25mm/s Combing mode: Within Infill Z Hop When Retracted enabled Build Plate Adhesion Type: Brim Brim Line Count: 6 Other settings are the default ones.
Statistics
Likes
3
Downloads
0