Ender 3 Extruder Moai Statue - The Bruh Spinner [+ Extruder knob D-pipe]

Description

This is among my first prints and my first remix/make. Printed the original Julien_DaCosta's Moai statue to test my marble PLA but didn't really know what to do with the result even though I like the model very much. Decided to immortalize it somehow and since I got bored of the E3V2 blue extruder knob, I decided to make a Moai extruder knob. In the files is also the Cura project file (should be 1-click if you have a stock E3V2) and the extruder D-pipe as a.stl and .ipt in case you want to put it together with something else. I call it the "Bruh Spinner" however childish that might be. It's funny to watch it spin around when printing. It was made using Autodesk Inventor (the d-shaft hole) and Meshmixer (to combine the parts together) I recommend printing it the way it is - "lying" on its back, with supports turned on (only from baseplate - removing supports from the hole is P.I.T.A. - I haven't done much testing though, so if you find a better way to print it, feel free to share! Printer - Creality Ender 3 V2 Infill - 10% should be plenty unless you plan on yanking it hard Supports - Yes, only on buildplate, I used 5% density Speed - 65mm/s Layer Height - 0,2mm Temps - 60°C/200°C

Statistics

Category

Tags