ARTSEY.IO Paintbrush V4 Bento style case.
Description
This is a two piece case designed for the 8 key ThePaintbrush V4 PCB, designed by KemoNine, found here: https://github.com/artseyio/thepaintbrush This keyboard is designed to be used with the ARTSEY system or style of typing, which you can find more info here: https://artsey.io/ This case is designed specifically for the V4 PCB found on the github link posted above, and utilizes M2 x 3.5 x 4 heat inserts to attach the PCB, which I found on AliExpress. There are 8mm recesses in the bottom for adding 8x2mm 3M bumpons to provide an anti-slip base so the keyboard won't slide around while using it. *This version is designed for the right hand setup. If you mirror the STL when printing it will work, but the logo will be mirrored as well. My apologies to the Lefties out there! I'll fix this and add a Left Hand model as soon as possible. Edit: Added a blank top with no logo so that it can be used as is, or mirrored to be used with the Left Hand setup. There are three files available for download, the bottom half, and two top halves. One is slightly taller than the other to account for an OLED display used along with the MCU. The two halves fit together with very little play, and there is a recess designed in to the top and bottom halves to use an elastic band or something similar to hold them together for travel. I printed these at 90% flow to prevent them being too tight... may be a bit of a hack, but it worked with my printing setup, your printer setup may be slightly different. Good luck!
Statistics
Likes
3
Downloads
0