Nothing but horse Dick
Description
- Insert-able length is 8.3" (210 mm), head diameter 1.9" (47mm), shaft diameter 1.4" (38 mm), medial ring 1.8" (46mm), it also has a suction cup base. - Mold volume 380ml - Can be scaled or cut in your slicer program and glued together to any size you want - mold has location for 6 10mm dowels. - Each has a mold and the actual pecker itself depending on how you are going to mold them. -- A good silicone choice "Smooth-on dragon skin 10 Slow" ___________________________________________________________________ - https://www.billieruben.info/post/3d-printing-sex-toys-a-quick-easy-and-safe-method - Print with thick walls ex: 4 layers or more - if going the wax route don't let the molten wax sit in the mold too long, it softens the plastic - the mold is one time use flashing free, it can be opened (if the wax process doesn't go 100% as planned) and reused but you will have flashing on the toy to remove. - you can also just print the dick it self, sand it smooth, seal and make a mold the old fashion way, use this way for the best results. - I recommend printing vertical if possible to get the resolution. - also need some 5mm dowels to align the top but not 100% needed. - pour the silicone to just bellow the surface then right at the end of the pot life smush the top on using pins (ex skewers) in the alignment hole and a weight to keep it from moving - a good resource for silicone toy making: https://vimeo.com/candiru - if you screw up your first toy just cut it up and use it as filler for the next toy - Have Fun!!
Statistics
Likes
27
Downloads
0