Hydroponic Tower - Module Adapter with screws
Description
I designed this to overcome a problem that i had with the original module adapter when using a repurposed HD-PE container. As HD-PE wont stick to anything i decided to make a modified version of the bucket adapter that has some screw hole and M16 plastic screws and nuts. This avoids rotation of the adapter when undoing the lock position from the top modules Printing: <ul> <li>Screws and nuts: For these use a high infill (>70%) and compensate with horizontal expansion (-0,25mm in my case) in case of a too tight fit. Use bed only supports for the screws</li> <li>Adapter: print with same settings as the original</li> </ul>
Statistics
Likes
4
Downloads
0