Server 24 drive JBOD - Modular Design
Description
**Included a "Drive Test" STL to test tolerances on your specific printer.** Print with something other than PLA as the warm drives will warp it. Each section will use about 1 full 1kg spool of filament, depending on infill. Drive tolerance is tight, so depending on printer you may need to scale up by 1% or so. Use PCI riser to give power to your SAS Expander, and a zIp tie to keep the PCI card in the slot (No screws). Fan slots are for 92mm fans.
Statistics
Likes
4
Downloads
0