Bakfiets Garage Opener Mount v1
Description
Designed up this LiftMaster garage door opener mount for a friends Bakfiets. Could easily glue in thin plastic to further help with weather proofing if desired. Mounts to the plywood box with #8 wood screws. Could be repurposed in other places, and happy to adjust dimensions if someone needs a variant of this. Note: I did not make any effort to greatly optimize to save material for this print. Could easily shave out some material in areas if desired. Printed on a Markforged Mark2 with Onyx (similar to Nylon-X). Suggest using a brim as the turbo supports wanted to drift a bit during printing. Layer height = 0.1mm In fill = Hex @ 24% Supports = On Designed in SolidWorks 2020.
Statistics
Likes
1
Downloads
0