Ender 5 Electronics Case - SKR Mini e3 / Relays / Buck Converters / RaspberryPi Mod
Description
Thanks to the excellent Ender 5 Electronics Case by Teaching Tech, I remixed this to use with the stock mainboard or an SKR Mini e3. I also use a RaspberryPi for Octoprint, so I added screw bosses in for that, as well as a spot for a big YYG-2 relay and 2 small relays, along with 2 buck converters. Note: All covers are oriented the same way in the download. If you rotate the middle covers (so that the screw bosses and hinges point up), and you care about your print finish being the same on all covers, you will need to make sure you rotate the other covers as well 180 degrees. Edit: Looks like the buck converter CAD file I used was incorrect for the type of converter I have, so I changed the screw bosses to match that one. I also lengthened the screw bosses to allow for a bit longer screws, which required some small changes to the lower cases.
Statistics
Likes
1
Downloads
0