6" rack Raspberry pi 4 module - Fast SD change - W/fan
Description
This is a KronBjorn's Raspberry pi chassis with fan remix for his 6" rack project. It is basically a shorter version from the original one, that able you to change the SD card from the front without disassembly the chassis. Have in mind that you will need a shorter bolt for the bottom-right hole of the front panel so the bolt doesn't damage the usb-C power connector. The enclosure is also a bit shorter than the original so you will save a bit of time and filament. Also, a little trick is to use a bit of tape on the sd card, to be able to pull it easier when the chassis is mounted on the rack. I made it for the Raspberry pi 4 using the pgrondek's RPI4 backplate.
Statistics
Likes
1
Downloads
0