18650 battery box with twist lock
Description
18650er Akkubox mit Verschluss Handliche und stabile Akkubox mit Drehverschluss für 2x 18650er Akkus - etwas eleganter als herkömmliche Akkuboxen. Tipps für den Druck: Auf Maßhaltigkeit achten, da der Verschluss nur wenig Spielraum bekommt damit er sich nicht selbstständig in einer Tasche entriegeln kann. lock.stl separat und langsamer drucken, Mindestdicke (1,2mm) ist für 0,4mm Nozzle optimiert. Nach der Montage ein paar Mal hin und her drehen und evtl. mit sehr wenig Kugellagerfett versehen. Material für den Verschluss: PETG oder ähnlich stabil und leicht biegsam (wird nämlich bei der Montage eingeklickt) ______________________________________________________________________ 18650 battery box with lock Handy and stable battery box with twist lock for 2x 18650 batteries - a bit more elegant than conventional battery boxes. Tips for printing: Pay attention to dimensional accuracy, as the lock has little room for maneuver so that it cannot unlock itself in a pocket. lock.stl print separately and more slowly, minimum thickness (1.2mm) is optimized for 0.4mm nozzle. After assembly, turn it back and forth a few times and, if necessary, apply very little ball bearing grease. Material for the closure: PETG or similar stable and slightly flexible (is clicked in during assembly) ______________________________________________________________________ bot.stl & top.stl Material: PETG Layerheights: 0.1-0.2 mm Infill: 30-35% Support: Yes lock.stl Material: PETG Layerheights: 0.1-0.2 mm Infill: 100% Support: Yes
Statistics
Likes
6
Downloads
0