3M bayonet extension with 16mm or 20mm ID fake pipe connector for cosplay like starwars tie fighter pilot or madmax immortan joe
Description
*Warnings* Warning : you will need a 3M gasket as the print is not leak proof. Warning : not tested to be safe for use, nor effective against viruses. Warning : only for reference use, not for actual PPE usage. *Updates* 21 Aug 2021 : V2 for the 16mm connector has thicker walls and a thin 0.2mm disc in the middle so that the print can bridge properly. !!! Please break the middle disc off before use !!! The bayonet connector also has mini 0.4mm supports so that you can break them off easily. Whole thing can be printed without supports. The hose connector now has a notch for you to secure your hose with ziptie. ============== 3M bayonet extension with 16mm or 20mm ID fake pipe connector for cosplay like starwars tie fighter pilot or madmax immortan joe. best used with corrugated pipe, the aquarium pipe was for show. Dont mind the photo showing melted PLA, i did not print with supports and was melting the drooping plastic.
Statistics
Likes
4
Downloads
0