Main Brush coupling Vacuum robot Ecovacs U2 Pro
Description
A litte part, that drives the main brush via the D-Shaft coming from the interior. This part may be lost while cleaning the brush. Depending on you slicer, it is advisable to enlarge the inner bore (Cura option: 'Horizontal Hole Expansion' = 0,1 mm) I used PLA, but maybe PETG or ASA are the better option, since the layer adhesion is not extremely important. Ecovacs Deebot U2 Pro DeebotU2 U2Pro DeebotU2Pro
Statistics
Likes
1
Downloads
0