32 oz Bottle Funnel
Description
UPDATE 08/20/2021: Decided to Update and add 2 more files for 20 oz Gatorade Bottles for anyone that reuses the smaller bottles that don't mix up more than 1 at a time. UPDATE 08/19/2021: Anyone that downloaded the files, They just been updated. For some reason Dimensions were off and it printed smaller diameter then i expected. So new measurements were taken and I amended the files to reflect the change. New Files uploaded. ==================================================================== Decided to Design this Funnel because the ones you get at the store aren't suitable for using with power mixes, Holes are to small and takes forever to get the powder down into the bottle. I buy Kool-Aid, Gatorade in bulk and I reuse bottles to mix up more to drink. So this funnel is made for a 32 oz. Gatorade Bottle. It has about 10mm ring to fit on the inside of the bottle, 17mm tall and around 50mm in Diameter with about a 40* angle so should provide ample room and slope for the powder mix to be poured in and fall into the bottle. This will make it easier to pour in the powder from a scoop into the bottle then pour in your water. Added Design with 10mm Handle with 5mm diameter hole for hanging if needed.
Statistics
Likes
5
Downloads
0