Printrbot Makers Kit Filament Guide (Model 1405)

Description

This Is A Filament Guide Designed For The Printrbot Makers Kit Model 1405. It Attaches To The Rear Screw On The "Y Top Back" Piece. After Printing You Need To Thread The Screw Into The Hole All Of The Way And Then You Can Attach It To The Printer.This Guide Also Needs To Be Printed Solid Because It Is So Small. It Only Takes About 5 Minutes To Print And Will Save You Many Prints By Reducing The Strain On The Extruder Motor And Prevent The Filament From Grinding On Itself. In Turn Saving You Time ,Money ,And Filament!

Statistics

Category

Tags