14x5 snare drum shell
Description
Snare drum shell - 14x5, 10 lug - designed in Fusion360 - https://youtu.be/3Sv5pIJKCjo I printed this with supports for the bottom rim and snare bed as well as supports for the tab that connects the sections. I used support blockers for the hardware holes as support is unnecessary for those. I used 4 walls, but would suggest experimenting with infill as more or less infill will affect the sound. This was printed on a CR-10 so I could do all 5 sections in a single print, but each section will fit on a 200x200 (Ender3) print bed. Assembly is simple, just insert the tabs into the slots. I used two part epoxy to assemble everything. There is a small gap between each drum section to leave room for the epoxy. Holes were printed for the following hardware: lugs: 2 inch tube lugs (https://www.amazon.com/gp/product/B01CU519QQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) Gibraltar snare throw off: https://www.amazon.com/gp/product/B0002F75TW/ref=ox_sc_saved_title_8?smid=ATVPDKIKX0DER&psc=1 Gibraltar butt end: https://www.amazon.com/gp/product/B0002F75PQ/ref=ox_sc_saved_title_9?smid=ATVPDKIKX0DER&psc=1
Statistics
Likes
15
Downloads
0