Steyr AUG Short Barrel Adapter - TM, Classic Army, JG etc Airsoft
Description
This is an adapter I designed that will allow you to remove the long outter barrel from an airsoft AUG and replace it with an adapter to install turn the rifle into a short barrel CQB variant. Installation is fairly easy but some cutting will be necessary on the alluminium barrel tube thing to bring it down to the same length as the new barrel. This is quite easy as the material is very soft and quick to cut. Underneath the forward grip there is a grub screw that holds the outter barrel into the receiver. Remove this so the outter barrel comes off and install the adapter in its place. You can then move the flash hider from the old outter barrel to this new adapter. I printed at 0.2 later height with 20% infill and 3 walls. I also printed with supports enabled everywhere.
Statistics
Likes
3
Downloads
0