Hexagonal Dice Tower - Double and Single spiral
Description
Just another Hexagonal Dice Tower - Designed for a dice to roll down the hex tower in a clockwise spiral. - Suits Dice Size Do= 25mm (1" inch outer diameter sized dice) - No supports required, There's three version here: 1 - the original double spiral with 2 exits: It's got 3 sets of inclined baffles each set at 120 degrees rotation. will give your dice a good roll in all directions. 2 - the modified single spiral with only one exit. has 3 inclined baffles in opposing directions, 3 - optional for the single spiral dice tower reduced height by 33%; still works fine for Do=25mm dice (1 inch dice) Printing: -no supports -225mm high so make sure you've got the space -expect 18+ hour print with 0.32mm layer height -reduce print time by setting initial layer and bottom layer to: "0" (your milage may vary)
Statistics
Likes
2
Downloads
0