Speed Feed Lid for Spire 3/IR with Rotor Speed Feeds
Description
Lid for Spire 3/IR Paintball hopper, which allows the use of speed feeds for the Rotor 1. Works with purchaseable and self-printed Rotor inserts. Printing: For good stability use PETG and level the bed a little tighter for glossy surfaces Lid: resolution 0,2mm/ print support (Cura: 45%/ touch bed)/80% infill. Print upside down. Ring: Resolution 0,2mm/ no support/ 80% infill. print upside down Use 3x6mm countersunk screws removing the support under the snap-lock where it sits in the hinge of the spire is a bit tricky but worth it. it will give the snap the flexibility for easy install/uninstall like the after market parts. like the original expensive lids, the lid can be opened completely for loading off the field
Statistics
Likes
6
Downloads
0