Fridge handle for Gorenje 180mm
Description
This is a fridge handle for Gorenje refrigerator with 180mm distance between holes and slightly curved door. It is designed such that it does not need any support. I used only 15% gyroid infill with 4 walls and 0.6mm nozzle. I did not sand it, but, with sanding it would appear much better. Print it vertically in order to in order to force you are using to open the fridge be parallel with layers and to avoid braking the handles between two layers (which happened to me with some previous models I downloaded form the net, which I, to reduce support, printed horizontally). It is, all together, 22cm height model. So, be sure that your printer supports such height. Be aware that some gadgets on extruder or on z-axis may reduce original height. I had to remove extruder knob during the printing, and filament guide before extruder left me only 1mm more of height. Also, I left bowden tube free (usually they are tightened) This is designed in OpenSCAD.
Statistics
Likes
0
Downloads
0