Raspberry Pi 2 B+ mounting cage for Top Hat DIN Rail / Cap Rail / Hutschiene 35mm
Description
This Is A Bare Holder To Mount Your Raspberry Pi B+/2 On So It Stands Level On The Table Even With Mounted Heatsink On The Bottom. You Can Use My *Top Hat Rail / Cap Rail Mount Base Plate* (Http://Www.Thingiverse.Com/Thing:684759) To Easily Mount Your Raspberry Pi Into Your Control Cabinet. There Are Two Versions Of The Holder: - One With A Flat Base For Simple Table Stand Or For Glue To The Flat Cap Rail Mount Base Plate - One With Clips To Snap On The Version Of My Cap Rail Mount That Has Notches Thread The Holes With M2.6 Thread Cutter Before Mounting The Pi On It. Hint: The Clips Snaps Really Tight On The Notches Of The Cap Rail Mount. I Carefully Bent The Clips A Little Bit Before Putting These Two Together. You Have To Use Quite A Lot Force To Snap Them Together. But The Pla I Used For Printing Was Flexible Enough. Once Snapped Together It Is Not Designed To Be Put Apart Again. Have Fun With It :)
Statistics
Likes
78
Downloads
0