Hevort Mellow BMG Aqua Carriage for HD12 MGN9 Carbon fiber X
Description
Carriage for Mellow BMG Aqua on MGN9H with 20x20 Carbon Fiber Box X axis Only 67Grams weight Longest screws used is M3 10mm, Shortest just M3 6mm Front of belts are held locked in place by the BMG extruder itself Mellow BMGAqua used is from ali express the ADXL345 mount is for one of the tiny 20mm ones from Am@z0n The Optical sensor is just a cheap one from Aliexpress with the plug on the opposite side of the board to the sensor I printed with tree supports everywhere for the main body to ensure the belt paths were supported and tree supports touching buildplate for the partduct to keep the airspace inside clear. Print settings I used are 0.45mm with 0.6mm layer height The main body and top printed standing the right way up The grips printed laying flat on their backs the partduct printed stood on its flat end for bltouch use the mount from my mgn12 version
Statistics
Likes
1
Downloads
0