XL4015 buck/step down converter box
Description
XL4015 box, 24x54mm board It has pleny of holes, you may mount it using zip ties. Its sliding lid is thin and flexible I prefer printing it a bit wider than the actual mating area, I bend a bit and slide in which makes a tight fit. I intentionally did not make the 2 holes of the board, but dedicated area is present. It has 3mm space under the board area, so zip ties can be used there as well. I also uploaded the 8.5mm shorter version for the same board. Don't use supports, no need for raft either.
Statistics
Likes
6
Downloads
0