Hemera Extruder Mount for Voron V0
Description
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Hemera Bowden Extruder mount for Voron V0. Compatible for both Voron V0 and Voron V0.1 3D Printer Slicer Setting: 1. Infill: 40% 2. Infill Pattern: Grid, Gyroid, Honeycomb, Triangle or Cubic 3. Layer Height: 0.2 mm 4. Extrusion Width: Forced 0.4 mm 5. Wall Count: Minimum 4 6. Solid Top/Bottom Layers: Minimum 5 BOM 1. M3*12 - 2 2. M3*8 - 4 3. Hemera Mount - 1 Installation Guide Step 1: Screw Hemera to the mount using M3*8 screws (for the orientation of the hemera refer the images) Caution: Do not over tighten the screws, high risk of chipping off of the mount. Step 2: Install the mount on the Voron V0 using M3*12 screws. Note: No external modification required on the acrylic plate of the Voron V0. Step 3: Flex your printer. (please do not take it literally) https://3rdeyelabs.io
Statistics
Likes
0
Downloads
0