Toolhead Voron V0
Description
Tool Head modification for Voron The modifications are to replace the pushfit ECAS connector with a PC4-M10 Male Straight Pneumatic Tube Push Fitting Connector for Voron V0 ( V6 Threaded hotend) 3D Printer Slicer Setting: 1. Infill: 40% 2. Infill Pattern: Grid, Gyroid, Honeycomb, Triangle or Cubic 3. Layer Height: 0.2 mm 4. Extrusion Width: Forced 0.4 mm 5. Wall Count: Minimum 4 6. Solid Top/Bottom Layers: Minimum 5 For Installation guide follow as per the guidelines given in Voron V0.0 manual. No extra modification is required on the Voron. https://3rdeyelabs.io
Statistics
Likes
1
Downloads
0