Camera rig for anamorphic lens LOMO 35 NAP2-3M 80-140 mm
Description
Warning! I haven`t tested this, according to my project should be ok. This is my conception of camera`s rig with using anamorphic lens 35 NAP2-3M 80-140 mm. Camera mount is designed for Sony A7R3 camera, but if you have possibilities you can design a new one for your gear: Distance between tubes axis: 130mm Distance between tube axis and NAP2-3M axis: 70mm Parts list: 1. NAP2-3M front lens 2. NAP2-3M back lens 3. 2 pcs. Aluminium (or whatever you want) pipe diameter 16mm wall 2mm, L=350mm 4. Bolt M8 L=40mm 5. 2 pcs. bolt M5 L=16mm 6. 14 pcs. small screws ca. 3mm for blocking lenses, camera and ends on tube rails. 7. 1/4 inch screw for mounting camera 8. Printed parts Assembly view you can find below. Next step: design lens shades between camera-back lens and back - front lenses. Update #1: I did mistake in internal diameter of Front lens part (112mm), corrected (to 107mm) in file: RIG_FRONT_LENS_V2.STL. If you printed previous version of FRONT_LENS - please use "ring.stl" as a sleeve.
Statistics
Likes
0
Downloads
0