Case Mods for Shapeoko 2 Electronics
Description
These Are Some Of The Mods I Designed To Accommodate My Shapeoko 2 Electronics Into A Computer Case I Was No Longer Using. I Still Plan On Adding An Motherboard And Such To It To Have An All Inclusive Case For The Host Computer And Cnc Electronics. The Case Used Is An Inwin Maelstrom Case With Tool Less Design. The Tray Should Work With Just About Any Computer, But The Cover May Not Unless Your Case Covers Are Similar To Mine. The Top Cover In The Pictures Is Used For The Spindle Speed Controller Found @ Inventables. It Is Mostly Pressure Fitted In Place But Uses Screws To Apply More Pressure To Secure It Into Place. The Bottom Tray Houses The Tinyg. It Has Holes For A 120Mm Fan Or My Tinyg Mount I Made Found Here : Http://Www.Thingiverse.Com/Thing:672426. I Included Blank Trays And A Cover In Case You Needed To Modify Them For Your Own Purposes. Let Me Know If You Have Questions, Comments, Suggestions, Or Concerns. Thanks =)
Statistics
Likes
24
Downloads
0