N64 to Wii AV Multi Adapter
Description
This adapter allows you to plug a Wii video cable into the AV Multi port into an Nintendo 64. The primary purpose is to allow the use of Wii component video cable on Nintendo 64 consoles modded with N64Digital and UltraHDMI in YUV mode. Part ----------- SNES Video Plug - https://www.aliexpress.com/item/4000049107078.html PCB - Main: https://oshpark.com/shared_projects/2VKueJ8L - Sub: https://oshpark.com/shared_projects/sq9awzi0 Screw and nut - M2x12mm (total length 13.8mm) screw and hex nut: https://www.amazon.com/gp/product/B014OO5KQG Print ------- Print the parts upside down for accurate port dimensions. If you prefer better exterior look, print upright with a raft to minimize height error. The ring is for joining this adapter together with the mini HDMI to full HDMI adapter for the N64Digital, for better mechanical rigidity. It should also help even if the HDMI adapter is not in place, so the adapter can't sag and damage anything. https://www.thingiverse.com/thing:4924766 Assembly -------- File the Wii end of the PCB so it has a chamfer on both the top and bottom side of the board. This is to ensure it doesn't destroy the contacts inside your Wii component cable. Solder the two PCBs toghether. Note the "This should NOT be visible" silkscreen print and obey. Then solder the SNES header onto the PCB assembly. Note the "Top" print. This indicates the way the notch on the plug should face. Place the soldered assembly into the printed shell and screw them together.
Statistics
Likes
7
Downloads
0