GELSOFT 14mm CCW hop up stablizer SPLIT with 14mmCCW on end
Description
Custom designed by me, so lemme know if i can make improvements. A Gel Blaster Hop-up holder designed for 14mmCCW threads over a 19mm outer barrel. The Split design allows part 1 to be screwed to the blaster, then part 2 and 3 are to be glued together. Once part 1 is mounted to the outer barrel, and part 2 (part 2 and threaded cap) are glued together, a hop up can be fitted inside. Steps if you're confused... just in case ya know... 1. thread part 1 to outer barrel 2. glue part 2 to end cap, be absolutely sure that it is aligned properly (still working on making that fool proof tho...) 3. mount hop-up to inner barrel and secure the grub screws through the holes provided 4. once hop-up is mounted to your liking, screw part 2 until desired height/depth/distance is reached. 5. screw on any muzzle device (be warned, I've only tried this with printed mock suppressors. i have no idea is tracer units work as I don't have one...) Again, Any improvements or ideas are greatly appreciated.
Statistics
Likes
0
Downloads
0