Network cable drum
Description
This is a cable spool for a 30m flat cat6 network cable. I made this of an old spindle from blank compact disks, which contains 25 disks. Just print the parts, cut the inner circle from the lid with a dremel or sharp knive and put the things together. Have fun with a cable spool, which can hold 30m of flat network cable. BOM Tools: A sharp cutter knife or a Dremel. A screwdriver. Printed Parts: 1x crank 1x plate 1x shaft other: 6x 2.5x12-16 mm wood screws
Statistics
Likes
0
Downloads
0