Turbinado - Ender3v2 Shroud
Description
Hi there I guess having a lot of options is never bad so I bring yet another custom shroud for the Ender3v2 (not sure if it also fits in Ender3 pro). I designed this with some key points in mind: - Aesthetically pleasing, covering the hotend and fans to avoid looking just like a bunch of fans screwed together (I gathered some inspiration from the Voron) - Allow for 4020 fan and tween blowers, so I can get some quieter fans and better cooling - Easier to take a look at the nozzle, to check everything is going fine - Allow to remove it easily without needing to unscrew stuff just to change a nozzle This shroud supports 4020 or 4010 fans in the front (using the respective cover) and uses two 4010 blowers in the sides to provide plenty and symmetrical cooling power. You will need 8x M3x12 screws or similar to assemble everything together There are 2 different side covers provided, they only change aesthetically, so take you preference. For the side parts you will need to mirror them when printing the other side. You can also use only one side if you wish, up to you. Apologies for not providing any support for BLTouch but I do not have one to test. So, feel free if you want to remix or create one. If everything goes right with your printing, you should be able to fit the main assembly into the back part just by using the doves that fix everything together. It may require some slight of hand to take the shroud out and put it back but still it is much easier than the original shroud. Follow the Cura screenshots for printing guide I also added some assembly instructions, though it should be pretty straight forward Have fun and hope you like it
Statistics
Likes
24
Downloads
0