Phaetus Dragon Silicone Sock Mold - Voron logo
Description
Mold for the Phaetus Dragon hotend sock, with a voron logo added for the cool factor Note that this may not work with the rectangular Triangle Labs heater block or other clone versions of the Dragon Hotend - verify that your hotend uses the angled heater block first! Use high-temp RTV, it's usually red and has a temperature rating of around 350c or 750f written on the packaging. For best results, use a high quality product that specifies constant operating temperature, not intermittent operating temperature Simple to use - just soak all parts in soapy water, squeeze a good amount of RTV silicone in the bottom shell, and then press in the core + top shell. Note the indexing marks for easier and more precise alignment. Print at 0.1mm or the lowest layer height you can manage.
Statistics
Likes
8
Downloads
0